Various types of floor maintenance inspection

First of all, whether it is composite wood flooring or solid wood flooring, do not wipe directly with a wet mop with detergent when cleaning, so that moisture will penetrate the floor surface cracks, paint breaks and corners into the inner layer of the floor, causing the floor to rise. After the moldy rot and waxing, the wax layer cannot be completely attached (a little white spot appears on the floor). Professional floor cleaning products should be used to effectively maintain the original appearance and performance of the floor, and there is no odor or stickiness after cleaning.

First, the general floor

According to the floor material, choose the appropriate floor cleaner, before use, according to the degree of dirt, pour the appropriate amount of floor cleaner into the bucket to dilute, and then Use a mop to mop the room from the room to the door. If it is a corner or floor seam and other places that are difficult to clean, you can use the old toothbrush to directly scrub the floor cleaner to remove the stubborn dirt. You can also directly pour the floor cleaner onto the rag. Need to be reminded: some detergents have a higher concentration of surfactants. After using these cleaners to clean the ground, the semi-wet floor is more likely to be contaminated with dust. Therefore, we must pay special attention to the selection of products with good reputation. If you want to make the floor clean after the cleaning, you can use the floor cleaning brightener with water wax formula, just let it dry after use.

Second, wooden floor

wooden floor should not be wiped directly with a wet mop, should use the special cleaning agent for wooden floor to clean, so that the floor to maintain the original warm texture, prevent the board from cracking. Because too much water will penetrate into the inner layer of the wooden floor, causing the floor to become moldy and even rot. When using floor cleaners, wring the mop as much as possible. If the surface of the wooden floor is not waxed, it is better not to touch the water. It is best to try it out in an inconspicuous place and make sure that there is no problem and then use it in a large area.

If you want to avoid long-term stepping on the floor wear, keep the floor shiny and bright for a long time, it is necessary to put a layer of wood floor wax maintenance agent after the floor is cleaned. It should be noted that the floor must be completely air-dried before waxing, so as not to completely adhere to the wooden floor, but the floor will appear a little white spot.

Third, bamboo flooring

In the daily use process, keep the bamboo floor floor clean and clean, use a clean broom to sweep, then use the wringed mop to drag, usually also Use a soft, damp cloth to gently wipe the floor. Of course, you can use a vacuum cleaner to remove dust from the floor. Depending on the application, it can be waxed once every few years to keep the paint film smooth and smooth. If conditions permit, the floor wax can be applied to the surface of the bamboo floor for 2 to 3 months, so that the maintenance effect is better.

Relevant recommended products

0.6/1kVPVC Insulation Fire Resistant Power Cable

High Quality Products Led Track Lighting 30W With Black

Enamel Coffee Pot

Cheap Hydraulic Concrete Placing Boom for sale

4SPSC 6SPSC Solar Pump For Easy Install Wells Prices CE Certification

Leave a Reply

Your email address will not be published. Required fields are marked *